LAN Port Device ID Order

Moderator: Andrey.Mazlin

Post Reply
cwagz
Posts: 2
Joined: Sun Jan 13, 2019 4:09 am

LAN Port Device ID Order

Post by cwagz »

Hi,

I am using a fitlet2 and LAN facet card to run pfsense. It works great. Only thing I would like to change is the order of the LAN ports.

Is there a way to reorder the PCI Dev ID on the Ethernet ports? I would like to be able to have them go 1,2,3,4 left to right from the back and then around the side with the facet lan card installed. Currently they identify 3,2,1,4. Can this be modified via EFI Shell or some other tool?

Thanks,
CWagz

tamir
Site Admin
Posts: 419
Joined: Mon Dec 25, 2017 4:21 pm

Re: LAN Port Device ID Order

Post by tamir »

I have consulted our R&D, this is not possible.
This numbering sequence is at the HW level.

cwagz
Posts: 2
Joined: Sun Jan 13, 2019 4:09 am

Re: LAN Port Device ID Order

Post by cwagz »

Thanks for checking tamir.

Post Reply

Return to “fitlet2 hardware”