View unanswered posts | View active topics It is currently Mon Jul 15, 2019 5:55 pm



Reply to topic  [ 4 posts ] 
 M.2 wifi compatibility 
Author Message

Joined: Wed Feb 20, 2019 6:22 pm
Posts: 4
Post M.2 wifi compatibility
Hey fit-iot,

I'm experiencing an issue with my fitlet 2. I have a known working fitlet2 and fc-pci card populated with an intel 8265 wifi card. I have removed the 8265 and tried using a 9260 (tested working in another machine) and only the bluetooth component populates, no output is provided from lspci or dmesg to indicate that a wifi component is even plugged in. I'm running kernel version 4.20.8 and have the 9260 driver installed, but I would not expect those to have any bearing on the card being detected as installed. Is there a compatibility issue here?

Regards,

kwitiii


Wed Feb 20, 2019 6:30 pm
Profile
Site Admin

Joined: Mon Dec 25, 2017 4:21 pm
Posts: 295
Post Re: M.2 wifi compatibility
We haven't tested the Intel 9260AC, but we have heard from customers that the following might work:

The cause of this issue is probably due to the inability to choose the right PCI interface speed
• PCI setting for Gen2 and De-emphasis in BIOS

Some platforms experience difficulties enumerating the Wi-Fi device after warm boot. The cause of this issue is the ability to choose the right PCI interface speed (Gen1/2). A fix for this issue is to disable the PCI De-emphasis option in the BIOS and set speed to Gen2.

1. De-emphasis disabled.
2. Speed – AUTO (to allow Gen2 speed).


Thu Feb 21, 2019 3:44 pm
Profile

Joined: Wed Jun 26, 2019 4:50 pm
Posts: 1
Post Re: M.2 wifi compatibility
Thank you tamir! I can confirm in my fitlet2 CE3930 that disabling the de-emphasis option of the BIOS has allowed my Intel 9260AC wifi/BT module to properly initialize during boot, whereas only BT would work properly before the change. I found the setting(s) buried in the BIOS under Chipset>South Cluster Configuration>PCI Express Configuration>PCI Express Root Port 3>PCIe Selectable De-emphasis>Disable in order to get the wifi to properly initialize under Ubuntu 18.04.1 LTS which apparently is running a kernel with the proper iwlwifi drivers from Intel to work with the Intel 9XXX wifi/BT modules.

The speed was already set to Auto in my case so I did not need to make any changes there. I confirmed that PCI Express Root Port 3 was the only one that needed to have the de-emphasis setting changed in my case with the Intel wifi module installed in the FC CEM fitlet card in the M.2 E key socket as recommended by the installation instructions: http://www.fit-pc.com/wiki/index.php?ti ... structions

Hope this will help someone else looking to integrate one of the newer Intel wifi/BT modules in a fitlet2.

Now I just wait for BlueZ to add better support for Bluetooth 5 features like LE coded PHY and I'll be in great shape!

Jeff


Mon Jul 01, 2019 5:23 pm
Profile
Site Admin

Joined: Mon Dec 25, 2017 4:21 pm
Posts: 295
Post Re: M.2 wifi compatibility
Good news, glad this worked out well for you.


Sun Jul 14, 2019 10:39 am
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 4 posts ] 

Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by STSoftware for PTF.