video Driver

DVI, HDMI (or lack of), VGA (or lack of), supported displays
Post Reply
djanreek@gmail.com
Posts: 2
Joined: Fri Aug 06, 2010 6:31 am

video Driver

Post by djanreek@gmail.com »

HI
I Just get new fit pc2. I imstalled win7 home ultimate and it works fine
But after i instaled video driver the screen start to be black after windows logo on boot. If you remove driver in safe mode its working with default win 7 driver
Please help!!!!!!!!!!!!

yogev_ezra
Posts: 539
Joined: Sun Mar 22, 2009 2:49 pm

Re: video Driver

Post by yogev_ezra »

1) Check that you installed the latest drivers
http://www.fit-pc2.com/forum/viewtopic.php?f=53&t=1782
2) Disable display 1 (LVDS, not connected) - then you should have all supported resolutions on display 2 (SDVO).
http://www.fit-pc2.com/forum/viewtopic.php?f=53&t=1524
3) Check that LCD clock is enabled in BIOS (I remember we did enable it before we sold you the computer but please check anyway). If it's enabled, then maybe disabling it will help.

djanreek@gmail.com
Posts: 2
Joined: Fri Aug 06, 2010 6:31 am

Re: video Driver

Post by djanreek@gmail.com »

Itried all
nothing work
change cabels monitor nothing work
Please help

yogev_ezra
Posts: 539
Joined: Sun Mar 22, 2009 2:49 pm

Re: video Driver

Post by yogev_ezra »

You can bring the computer again to me and we try together (just call me in advance). With my monitor everything works fine. Could be that your monitor does not support something...

Post Reply

Return to “Display interface”