Digital RCA to analog

Audio codec and audio ports
Post Reply
vegham
Posts: 12
Joined: Fri Jun 11, 2010 5:30 pm

Digital RCA to analog

Post by vegham »

I have fit-pc2 v1.4 with 5.1 digital sound. I also have 5.1 surround speakers with three analog minijack inputs. I want to connect these and get sound on all five speakers. What kind of converter will be needed?

Thanks.
Linux nerd

irads

Re: Digital RCA to analog

Post by irads »

You need receiver with S/PDIF support.

poq10
Posts: 2
Joined: Tue Nov 09, 2010 2:09 am

Re: Digital RCA to analog

Post by poq10 »

The 1.4 rev. contains the ALC662 codec. Aren't the Line-in and Mic-in jacks also functioning as Rear-out and Sub/Center-out?

irads

Re: Digital RCA to analog

Post by irads »

The ALC662 muxing does not allow full analog 5.1 with the fit-PC2 rev 1.4 routing. I am not sure about the usefulness of having partial analog output.

Post Reply

Return to “Audio”