Operating a Fit PC 2 without a Monitor

DVI, HDMI (or lack of), VGA (or lack of), supported displays
Post Reply
yiyangli
Posts: 1
Joined: Thu Apr 21, 2011 1:27 am

Operating a Fit PC 2 without a Monitor

Post by yiyangli »

I need to use the Fit PC 2 for a robotic application, so I cannot mount a monitor. The computer I bought will not power on unless it's connected to a monitor using DVI. It will automatically shut off if I disconnect the monitor or the DVI port. Turning the monitor off, however, still allows the Fit PC 2 to run.

Any suggestions on how to run the Fit PC 2 without a monitor?

irads

Re: Operating a Fit PC 2 without a Monitor

Post by irads »

If you cannot power-up the computer without a display attached then this is not a normal behavior and you would better have your computer replaced - rma@fit-pc.com
If the problem is only after OS is loaded then check drivers.

Post Reply

Return to “Display interface”