View unanswered posts | View active topics It is currently Sat Sep 21, 2019 5:46 pm



Reply to topic  [ 6 posts ] 
 Difference in USB configuration between fit-PC2 and fit-PC2i 
Author Message

Joined: Fri Apr 09, 2010 3:55 pm
Posts: 4
Post Difference in USB configuration between fit-PC2 and fit-PC2i
Hello.

I'm working with a team that is working on creating an autonomous underwater vehicle. We've been using the fit-PC2 as the "brain" for the vessel but recently we've hit a pretty serious snag. The problem is that we are using two USB 2.0 cameras and they are not working properly because they get connected to the same USB root hub. After analyzing the problem we found out that there seems to be only one USB 2.0 root hub in the fit-PC2. The rest are 1.1 hubs that are not sufficient for the cameras.

So my question is whether upgrading to the fit-PC2i will solve this for us? Does it have more USB 2.0 root hubs?

Kind regards, Stefan Freyr.


Sat Apr 10, 2010 10:47 am
Profile

Joined: Tue Feb 02, 2010 8:47 am
Posts: 44
Post Re: Difference in USB configuration between fit-PC2 and fit-PC2i
Hi Stefan,

There was an other poster that had found the same thing yesterday and I asked which ports are connected to the 2.0 hub. Do you know the answer to that?

Cheers,
Per


Sat Apr 10, 2010 2:37 pm
Profile
Site Admin

Joined: Mon Mar 16, 2009 2:11 pm
Posts: 2340
Post Re: Difference in USB configuration between fit-PC2 and fit-PC2i
The US15W in fit-PC2/i has a single EHCI (USB2 480Mbps) controller / root hub supporting the all 8 ports and 3 UHCI USB1.1 each supporting 2 ports.

_________________
-------------------------
Irad Stavi
fit-PC forum admin

-------------------------


Sat Apr 10, 2010 5:39 pm
Profile

Joined: Tue Feb 02, 2010 8:47 am
Posts: 44
Post Re: Difference in USB configuration between fit-PC2 and fit-PC2i
Hi Irads,

Do you also know the answer to my question, i.e. which hub is connected to which port.

fit-PC2:
Looking from the back we have 4 ports.
Lets call them; TL (top left), TR (top right), BL (bottom left), BR (bottom right).
Looking from the front we have 2 mini ports.
Lets call them; ML (mini left), MR (mini right)

The US15W has 4 controllers.
Lets call them; EHCI-A (2.0), UHCI-A (1.1), UHCI-B (1.1), UHCI-C (1.1), UHCI-D (1.1)

How are they connected? I.e TL=EHCI-A, TR=EHCI-A, etc.

Cheers,
Per


Sun Apr 11, 2010 5:36 am
Profile

Joined: Fri Apr 09, 2010 3:55 pm
Posts: 4
Post Re: Difference in USB configuration between fit-PC2 and fit-PC2i
per wrote:
How are they connected? I.e TL=EHCI-A, TR=EHCI-A, etc.


Hi.

According to our experiments there seems to be no such direct hardware wiring. It didn't matter what port we used, our USB 1.1 devices always ended up on one of the 1.1 hubs while 2.0 devices ended up on the 2.0 hub.

I don't know what it is but there seems to be some "logic" routing the devices to the "correct" controller.


Sun Apr 11, 2010 10:11 am
Profile
Site Admin

Joined: Mon Mar 16, 2009 2:11 pm
Posts: 2340
Post Re: Difference in USB configuration between fit-PC2 and fit-PC2i
All ports are EHCI 480 Mbps
The back right (U11) are port 0,1 UHCI
The back left (U12) are port 3,4 UHCI
Front right (P1) is port 2 UHCI
Front left (P2) is port 5 (EHCI only)

_________________
-------------------------
Irad Stavi
fit-PC forum admin

-------------------------


Sun Apr 11, 2010 2:16 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 6 posts ] 

Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by STSoftware for PTF.