Difference between revisions of "Airtop2 - Enable internal graphics display outputs"

From fit-PC wiki
Jump to: navigation, search
(Created page with "* This application note applies to Airtop2 configured with discrete GPU. * It provides instructions on how to enable the on-board display outputs. * In the Airtop2 configured...")   (change visibility)
 
Line 1: Line 1:
 
* This application note applies to Airtop2 configured with discrete GPU.
 
* This application note applies to Airtop2 configured with discrete GPU.
 
* It provides instructions on how to enable the on-board display outputs.
 
* It provides instructions on how to enable the on-board display outputs.
* In the Airtop2 configured with discrete GPU, by default the primary display setting is set to [Auto], disabling the on-board display outputs.
+
* In the Airtop2 configured with discrete GPU, by default, the primary display setting is set to [Auto], disabling the on-board display outputs.
 
* In order to be able to use all display outputs, the iGFX needs to be configured as primary.
 
* In order to be able to use all display outputs, the iGFX needs to be configured as primary.
 
* This way, the discrete GPU is recognized as a standard PCI device, co-existing with the iGFX.
 
* This way, the discrete GPU is recognized as a standard PCI device, co-existing with the iGFX.

Revision as of 07:57, 10 December 2019

  • This application note applies to Airtop2 configured with discrete GPU.
  • It provides instructions on how to enable the on-board display outputs.
  • In the Airtop2 configured with discrete GPU, by default, the primary display setting is set to [Auto], disabling the on-board display outputs.
  • In order to be able to use all display outputs, the iGFX needs to be configured as primary.
  • This way, the discrete GPU is recognized as a standard PCI device, co-existing with the iGFX.

Instructions

  1. Press [DEL] on startup to load the BIOS menu.
  2. Enter Chipset Menu
    1. Navigate to --> SA configuration --> Graphics configuration
    2. Pick [Primary Display] and Choose [IGFX].

[category: Airtop2] [category: application note]