Difference between revisions of "Airtop2 Troubleshooting"

From fit-PC wiki
Jump to: navigation, search
 
(37 intermediate revisions by one other user not shown)
Line 1: Line 1:
===Airtop2 BIOS reset:===
+
===[https://fit-pc.com/wiki/index.php?title=Airtop2_Troubleshooting_-_I_can%27t_turn_on_the_computer,_it_doesn%27t_wake_up <span style="color:green">I can't turn on the computer, it doesn't wake up</span>] ===
# Power down the PC and unplug the power cable.
+
# Open the service door.
+
# Remove the disks cartridge.
+
# Reset the BIOS by pressing the low profile push button SW1 (RTC_RST).
+
# Mount the disks cartridge and close the door.
+
# Plug the power and power up the PC (either auto-on or pressing power button).
+
[[File:Airtop2-bios-reset.gif|750px|captions]]
+
  
===Check memory (RAM)===
+
===[https://fit-pc.com/wiki/index.php?title=Airtop2_with_Linux_starts_up_with_flickering/bad_display <span style="color:green">Airtop2 with Linux starts up with flickering/bad display</span>] ===
Verify RAM modules are installed. The system will not boot without it.
+
  
===Check storage (HDD/SSD):===
+
===[https://fit-pc.com/wiki/index.php?title=Airtop2_Troubleshooting_-_I_don%27t_have_any_display_output,_there%27s_nothing_on_the_screen <span style="color:green">I don't have any display output, there's nothing on the screen</span>] ===
Verify power up without storage. Sometimes damaged drives may cause the overall system to malfunction.
+
  
===Check power supply (PSU):===
+
 
*Verify the power supply is not damaged and functions properly.
+
 
*If you have another power supply use it to eliminate and determine the failing side.
+
[[Category:Airtop2]]
*In case you use other power supply make sure it provides uninterrupted power and stable grounding.
+

Latest revision as of 10:37, 20 May 2020

I can't turn on the computer, it doesn't wake up

Airtop2 with Linux starts up with flickering/bad display

I don't have any display output, there's nothing on the screen