Difference between revisions of "Airtop3 - AMT configuration"

From fit-PC wiki
Jump to: navigation, search
(Created page with "* This guide instructs how to configure Intel AMT on Airtop3 '''AMT configuration''' 1. Enter BIOS menu by pressing ['''ESC'''] on startup 2. Navigate to "'''Boot'''" Tab and...")   (change visibility)
 
Line 2: Line 2:
  
 
'''AMT configuration'''
 
'''AMT configuration'''
1. Enter BIOS menu by pressing ['''ESC'''] on startup
+
# Enter BIOS menu by pressing ['''ESC'''] on startup
2. Navigate to "'''Boot'''" Tab and set "'''Built-In UEFI shell'''" to ['''Enabled''']
+
# Navigate to "'''Boot'''" Tab and set "'''Built-In UEFI shell'''" to ['''Enabled''']
3. Navigate to "Save & Exit" Tab, and choose Save and Exit option.
+
# Navigate to "Save & Exit" Tab, and choose Save and Exit option.
4. right after the machine reboots, press CTRL+P at the splash screen to enter MEBx BIOS.<br>
+
# right after the machine reboots, press CTRL+P at the splash screen to enter MEBx BIOS.<br>
5. Enter AMT configuration settings, you'll be prompted to enter a password.<br>
+
# Enter AMT configuration settings, you'll be prompted to enter a password.<br>
6. Change the default password. The default password is "admin". The new password has the comply with the following policies:<br>
+
# Change the default password. The default password is "admin". The new password has the comply with the following policies:<br>
 
* At least 8 characters
 
* At least 8 characters
 
* At least one digit character (eg. 0, 1, … 9)
 
* At least one digit character (eg. 0, 1, … 9)

Revision as of 09:22, 27 November 2019

  • This guide instructs how to configure Intel AMT on Airtop3

AMT configuration

  1. Enter BIOS menu by pressing [ESC] on startup
  2. Navigate to "Boot" Tab and set "Built-In UEFI shell" to [Enabled]
  3. Navigate to "Save & Exit" Tab, and choose Save and Exit option.
  4. right after the machine reboots, press CTRL+P at the splash screen to enter MEBx BIOS.
  5. Enter AMT configuration settings, you'll be prompted to enter a password.
  6. Change the default password. The default password is "admin". The new password has the comply with the following policies:
  • At least 8 characters
  • At least one digit character (eg. 0, 1, … 9)
  • At least one non-alpha-numeric character (e.g. !, $, ;) excluding colon, comma or quotes.
  • At least one lower-case letter (a, b, c, d...)
  • At least one upper case letter (A, B, C, D,...)

Optional: The AMT system uses DHCP to configure an IP Address.

  • If you do not have a DHCP server you can configure a static IP within Intel AMT Configuration > Network Setup > TCP/IP Settings.

4. After completing network configuration the Web interface should be available at port 16992 (http://<IP>:16992/). Log in once to verify that it is available and properly configured.