Difference between revisions of "Airtop: Installing I3M Linux Daemon"

From fit-PC wiki
Jump to: navigation, search
Line 15: Line 15:
 
# Reboot the Airtop after installation
 
# Reboot the Airtop after installation
 
# Now you can navigate through menus between multiple screens of the I<sup>3</sup>M that display system information, temperatures, power consumption and notifications
 
# Now you can navigate through menus between multiple screens of the I<sup>3</sup>M that display system information, temperatures, power consumption and notifications
 
  
 
=== Links ===
 
=== Links ===
 
* [[Airtop: I3M on Windows | Installing I<sup>3</sup>M on Windows]]
 
* [[Airtop: I3M on Windows | Installing I<sup>3</sup>M on Windows]]
 +
 +
[[category:Airtop]]
 +
[[category:I3M]]

Revision as of 09:13, 26 July 2016

I3M - The integrated interactive information monitor is a GUI system integrated in the front panel of Airtop.
I3M has the following major components:

  • An OLED display.
  • Navigation keys.
  • Programmable micro-controller.
  • Interfaces to power and temperature sensors on the motherboard.
  • Serial interfaces for communication with BIOS and operating system.
  • The user can navigate through menus between multiple screens of the I3M that display system information, temperatures, power consumption and notifications.
  • I3M firmware can be upgraded.


I3M Linux Daemon

  1. You need to install the airtop-fpsvc service that provides system information to the front panel
  2. Reboot the Airtop after installation
  3. Now you can navigate through menus between multiple screens of the I3M that display system information, temperatures, power consumption and notifications

Links