Difference between revisions of "Airtop Troubleshooting"
From fit-PC wiki
Line 1: | Line 1: | ||
− | 1. Airtop BIOS reset: | + | 1. '''Airtop BIOS reset:''' |
*Power down the PC and unplug the power cable. | *Power down the PC and unplug the power cable. | ||
*Open the service door. | *Open the service door. | ||
Line 9: | Line 9: | ||
:: [[File:Airtop_CMOS_reset.jpg|700px]] | :: [[File:Airtop_CMOS_reset.jpg|700px]] | ||
− | 2. Check memory (RAM): | + | 2. '''Check memory (RAM):''' |
* Verify RAM modules are installed. The system will not boot without it. | * Verify RAM modules are installed. The system will not boot without it. | ||
− | 3. Check storage (HDD/SSD): | + | 3. '''Check storage (HDD/SSD):''' |
* Verify power up without storage. Sometimes damaged drives may cause the overall system to malfunction. | * Verify power up without storage. Sometimes damaged drives may cause the overall system to malfunction. | ||
− | 4. Check power supply (PSU): | + | 4. '''Check power supply (PSU):''' |
*Verify the power supply is not damaged and functions properly. | *Verify the power supply is not damaged and functions properly. | ||
*If you have another power supply use it to eliminate and determine the failing side. | *If you have another power supply use it to eliminate and determine the failing side. |
Latest revision as of 11:11, 24 August 2020
1. Airtop BIOS reset:
- Power down the PC and unplug the power cable.
- Open the service door.
- Remove the disks cartridge.
- Reset the BIOS by pressing the low profile push button SW4 (RTC_RST).
- Mount the disks cartridge and close the door.
- Plug the power and power up the PC (either auto-on or pressing power button).
2. Check memory (RAM):
- Verify RAM modules are installed. The system will not boot without it.
3. Check storage (HDD/SSD):
- Verify power up without storage. Sometimes damaged drives may cause the overall system to malfunction.
4. Check power supply (PSU):
- Verify the power supply is not damaged and functions properly.
- If you have another power supply use it to eliminate and determine the failing side.
- In case you use other power supply make sure it provides uninterrupted power and stable grounding.