Difference between revisions of "Application note - Airtop3 configure PXE boot"
From fit-PC wiki
Line 1: | Line 1: | ||
* This application note applies to Airtop3 | * This application note applies to Airtop3 | ||
− | * It provides BIOS | + | * It provides BIOS configuration instructions to properly configure the Airtop3 to boot from PXE. |
==Instructions== | ==Instructions== |
Revision as of 13:35, 17 November 2019
- This application note applies to Airtop3
- It provides BIOS configuration instructions to properly configure the Airtop3 to boot from PXE.
Instructions
- Enter the BIOS menu by pressing "ESC" on startup.
- In the BIOS menu, browse to Advanced -> Network Stack Configuration menu.
- Set the Network Stack setting to [Enabled], as a result, additional settings will appear.
- Enable the appropriate functionality. (For example: for Ipv4 PXE functionality, set the Ipv4 PXE Support setting to [Enabled]).
- Press F4 to save and exit.
- Confirm by entering BIOS menu and checking at Boot tab that "UEFI PXE" option appears in the boot priorities list.