Difference between revisions of "Fitlet2 Troubleshooting"

From fit-PC wiki
Jump to: navigation, search
(4. fitlet2 BIOS reset)   (change visibility)
 
(7 intermediate revisions by the same user not shown)
Line 1: Line 1:
== I can't turn on the computer, it doesn't wake up ==
+
===[https://fit-pc.com/wiki/index.php?title=Fitlet2_Troubleshooting_-_I_can%27t_turn_on_the_computer,_it_doesn%27t_wake_up I can't turn on the computer, it doesn't wake up] ===
  
===1. Check power supply (PSU)===
+
===[https://fit-pc.com/wiki/index.php?title=Fitlet2_Troubleshooting_-_I_don%27t_have_any_display_output,_there%27s_nothing_on_the_screen I don't have any display output, there's nothing on the screen] ===
*Make sure the DC cable is not damaged and connected properly to the machine.
+
*Make sure the AC cord is properly plugged to both sides (Wall mounted well plugged).
+
*Trying an alternative adapter could eliminate bad PSU.
+
  
===2. Check memory (RAM)===
+
===[https://fit-pc.com/wiki/index.php?title=Troubleshooting_fitlet2_-_Linux_system_periodically_fails_to_boot_after_pressing_power_button fitlet2 Linux system periodically fails to boot after pressing power button] ===
*Verify RAM module is seated firmly in its socket.
+
*Try to eliminate faulty memory sticks by swapping it with one another.
+
  
===3. Check Peripherals (HDD/SSD/USB)===
+
===[https://fit-pc.com/wiki/index.php?title=Troubleshooting_fitlet2_-_running_Linux_does_not_have_a_working_audio_out/SPDIF fitlet2 running Linux does not have a working audio out/SPDIF] ===
*Unplug peripherals and try to power up with bare minimum, that includes HDD/SSD/USB devices.
+
*Verify power up without storage. Sometimes damaged drives may cause the overall system to malfunction.
+
  
===4. fitlet2 BIOS reset===
+
===[https://fit-pc.com/wiki/index.php?title=Troubleshooting_fitlet2_-_after_starting_the_OS_(Windows)_there_are_few_un-recognized_devices_under_Device_Manager After starting the OS (Windows) there are few unrecognized devices under Device Manager] ===
  
Reset BIOS settings to default for [[Fitlet2: Revision Notes#fitlet2 Rev 1.2 | fitlet2 revisions 1.2 and later]]:
+
===[https://fit-pc.com/wiki/index.php?title=Troubleshooting_fitlet2_-_UKLog.dat_file_on_Windows_10_OS_takes_up_all_the_free_disk_space UKLog.dat file on Windows 10 OS takes up all the free disk space] ===
  
[[File:Fitlet2_rtc_rst.png]]
+
===[http://www.fit-pc.com/web/support/rma/ RMA procedure] ===
  
#Unplug power cable from the fitlet2
+
[[Category:fitlet2]]
#Remove the 4x Phillips Chassis screws
+
#Remove bottom and top cover
+
#Remove the RAM stick
+
#Plug in power cable (should turn on automatically), and Wait ~10 seconds
+
#Unplug power cable
+
#Assemble back the RAM stick
+
#Press the RTC reset button.
+
#Plug power cable (should be automatically turned on)
+
 
+
BIOS settings should be reset to defaults.
+
 
+
* For fitlet2 older than rev 1.2 see [[Fitlet2 BIOS reset for rev 1.1 and older]]
+
 
+
== I don't have any display output, there's nothing on the screen ==
+
 
+
===1. Screen functionality and connectivity===
+
* Make sure both power and display cables are connected firmly on both sides.
+
* Make sure the screen is turned On and is functioning.
+
* The best way to check screen functionality is by connecting to a good known working machine.
+
 
+
===2. Validate memory===
+
*Display issues on POST are a common symptom of incorrectly assembled or bad Memory DIMMS
+
*Please refer to [http://fit-pc.com/wiki/index.php/fitlet2_Troubleshooting#2._Check_memory_.28RAM.29 Check memory RAM] to diagnose Memory
+
 
+
== fitlet2 Linux system periodically fails to boot after pressing power button ==
+
 
+
* If your Linux system periodically fails to boot after pressing power button and messages like "watchdog: BUG: soft lockup - CPU#2 stuck for 23s!" appears, please do the following BIOS settings changes:
+
 
+
# Press [Del] during boot to enter BIOS settings:
+
# Set Chipset -> South Cluster Configuration -> SCC Configuration -> SCC SD Card Support to [Disable]
+
 
+
== fitlet2 running Linux does not have a working audio out/SPDIF ==
+
* If your default BIOS setting "OS Selection" is set to [Windows] but [Linux] is desired, then run the following [https://fit-iot.com/files/download/fitlet2/sw/scripts/fitlet2_alc1150_hda_patch.sh script] and reboot the system
+
 
+
Code:
+
$ sudo ./fitlet2_alc1150_hda_patch.sh
+
$ sudo reboot
+

Latest revision as of 08:08, 11 April 2022

I can't turn on the computer, it doesn't wake up

I don't have any display output, there's nothing on the screen

fitlet2 Linux system periodically fails to boot after pressing power button

fitlet2 running Linux does not have a working audio out/SPDIF

After starting the OS (Windows) there are few unrecognized devices under Device Manager

UKLog.dat file on Windows 10 OS takes up all the free disk space

RMA procedure