Difference between revisions of "How to enable RAID on Airtop3"

From fit-PC wiki
Jump to: navigation, search
(Created page with "* This guide instructs how to enable RAID on Airtop3 == Instructions == * Enter BIOS menu by pressing ['''DEL'''] on startup * '''On BIOS version 0.30.04 and above''': ** Nav...")   (change visibility)
 
(Instructions)   (change visibility)
 
(One intermediate revision by the same user not shown)
Line 2: Line 2:
  
 
== Instructions ==
 
== Instructions ==
* Enter BIOS menu by pressing ['''DEL'''] on startup
+
* Enter the BIOS menu by pressing ['''DEL'''] on startup
 
* '''On BIOS version 0.30.04 and above''':
 
* '''On BIOS version 0.30.04 and above''':
 
** Navigate to "'''Quick-Settings'''" and set "'''RAID'''" to ['''Enabled''']
 
** Navigate to "'''Quick-Settings'''" and set "'''RAID'''" to ['''Enabled''']
Line 10: Line 10:
 
** Set "'''SATA Mode Selection'''" to ['''Intel RST'''].
 
** Set "'''SATA Mode Selection'''" to ['''Intel RST'''].
 
** Press F4 to save and exit
 
** Press F4 to save and exit
* Enter the setup again by pressing ['''DEL'''] on startup
+
* Enter the BIOS menu again by pressing ['''DEL'''] on startup
 
* Navigate to "'''Advanced'''" -> "'''Intel(R) Rapid Storage Technology'''"  
 
* Navigate to "'''Advanced'''" -> "'''Intel(R) Rapid Storage Technology'''"  
 
* Configure you RAID volume by selecting "'''Create RAID Volume'''"
 
* Configure you RAID volume by selecting "'''Create RAID Volume'''"

Latest revision as of 09:58, 9 July 2020

  • This guide instructs how to enable RAID on Airtop3

Instructions

  • Enter the BIOS menu by pressing [DEL] on startup
  • On BIOS version 0.30.04 and above:
    • Navigate to "Quick-Settings" and set "RAID" to [Enabled]
    • Press F4 to save and exit
  • On BIOS version 0.30.03 and below:
    • Navigate to "Chipset" -> "PCH-IO Configuration" -> "SATA And RST Configuration"
    • Set "SATA Mode Selection" to [Intel RST].
    • Press F4 to save and exit
  • Enter the BIOS menu again by pressing [DEL] on startup
  • Navigate to "Advanced" -> "Intel(R) Rapid Storage Technology"
  • Configure you RAID volume by selecting "Create RAID Volume"