How to enable RAID on Airtop3

From fit-PC wiki
Revision as of 09:56, 9 July 2020 by Yaniv (Talk | contribs) (Created page with "* This guide instructs how to enable RAID on Airtop3 == Instructions == * Enter BIOS menu by pressing ['''DEL'''] on startup * '''On BIOS version 0.30.04 and above''': ** Nav...")

(change visibility) (diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
  • This guide instructs how to enable RAID on Airtop3

Instructions

  • Enter BIOS menu by pressing [DEL] on startup
  • On BIOS version 0.30.04 and above:
    • Navigate to "Quick-Settings" and set "RAID" to [Enabled]
    • Press F4 to save and exit
  • On BIOS version 0.30.03 and below:
    • Navigate to "Chipset" -> "PCH-IO Configuration" -> "SATA And RST Configuration"
    • Set "SATA Mode Selection" to [Intel RST].
    • Press F4 to save and exit
  • Enter the setup again by pressing [DEL] on startup
  • Navigate to "Advanced" -> "Intel(R) Rapid Storage Technology"
  • Configure you RAID volume by selecting "Create RAID Volume"