Difference between revisions of "How to install mSATA SSD on FM-USB3 module"

From fit-PC wiki
Jump to: navigation, search
(Created page with "Instructions on how to install (or replace) mSATA SSD on FM-USB3 Module<br> === Notes === * IPC3 hardware revision 1.1 supports mSATA SSD on FM-USB3...")   (change visibility)
 
Line 6: Line 6:
  
 
=== Instructions ===
 
=== Instructions ===
# Open the service door (see Maintenance chapter).
+
# Open the service door (see Maintenance chapter in [http://fit-pc.com/download/ipc3/documents/ipc3-owners-manual.pdf IPC3 Owner’s Manual]).
 
# Remove the four screws on the bottom cover of the IPC3.
 
# Remove the four screws on the bottom cover of the IPC3.
 
# Carefully remove the bottom cover.
 
# Carefully remove the bottom cover.

Revision as of 16:33, 15 May 2017

Instructions on how to install (or replace) mSATA SSD on FM-USB3 Module

Notes

  • IPC3 hardware revision 1.1 supports mSATA SSD on FM-USB3 only.
  • IPC2 (all HW revisions) allow installation of mSATA drive on FM-USB3 in addition to onboard slot.

Instructions

  1. Open the service door (see Maintenance chapter in IPC3 Owner’s Manual).
  2. Remove the four screws on the bottom cover of the IPC3.
  3. Carefully remove the bottom cover.
  4. Remove the single screw that holds the FM-USB3 card.
  5. Carefully remove the FM-USB3 card in the computer.
  6. Now you have full access to mSATA slot. Connect mSATA by gently pushing it into plastic latch.
  7. Assemble in the reverse order