Difference between revisions of "IPC2 BIOS Update"
From fit-PC wiki
(Created page with '==BIOS update procedure== #Prepare FAT formatted USB Disk-on-key #Download the latest IPC2 BIOS ROM files #Unzip and copy 3 files to the root directory: #*IPC2.cap #*startup...') (change visibility) |
|||
| Line 7: | Line 7: | ||
#*ShellFlash64.efi | #*ShellFlash64.efi | ||
#Power on IPC2, enter BIOS by pressing F2. Go to "Boot Features" and set "Legacy Boot" to "Disable" | #Power on IPC2, enter BIOS by pressing F2. Go to "Boot Features" and set "Legacy Boot" to "Disable" | ||
| − | #Check on the "Boot" tab that inserted USB listed as first boot device, otherwise change the boot order accordingly | + | #Check on the "Boot" tab that inserted USB listed as first boot device, otherwise change the boot order accordingly |
#Go to "Exit" and press "Exit Saving changes" | #Go to "Exit" and press "Exit Saving changes" | ||
| − | #Power off the system, insert prepared USB disk into IPC2 and ensure no other USB devices connected and then power on again | + | #Power off the system, insert prepared USB disk into IPC2 and ensure no other USB devices connected and then power on again |
#IPC2 will start and BIOS update will take place after second restart | #IPC2 will start and BIOS update will take place after second restart | ||
#Wait until message "BIOS is updated successfully. Press any key to continue ..." | #Wait until message "BIOS is updated successfully. Press any key to continue ..." | ||
#Remove USB disk and press ENTER | #Remove USB disk and press ENTER | ||
#System may do several power cycles and then boot normally | #System may do several power cycles and then boot normally | ||
Revision as of 11:11, 31 August 2014
BIOS update procedure
- Prepare FAT formatted USB Disk-on-key
- Download the latest IPC2 BIOS ROM files
- Unzip and copy 3 files to the root directory:
- IPC2.cap
- startup.nsh
- ShellFlash64.efi
- Power on IPC2, enter BIOS by pressing F2. Go to "Boot Features" and set "Legacy Boot" to "Disable"
- Check on the "Boot" tab that inserted USB listed as first boot device, otherwise change the boot order accordingly
- Go to "Exit" and press "Exit Saving changes"
- Power off the system, insert prepared USB disk into IPC2 and ensure no other USB devices connected and then power on again
- IPC2 will start and BIOS update will take place after second restart
- Wait until message "BIOS is updated successfully. Press any key to continue ..."
- Remove USB disk and press ENTER
- System may do several power cycles and then boot normally
