Difference between revisions of "IPC2 BIOS Update"
From fit-PC wiki
Line 1: | Line 1: | ||
==BIOS update procedure== | ==BIOS update procedure== | ||
− | #Prepare FAT formatted | + | #Prepare FAT formatted USB Disk-on-key |
#Download the latest [[IPC2 BIOS ROM files]] | #Download the latest [[IPC2 BIOS ROM files]] | ||
#Unzip and copy 3 files to the root directory: | #Unzip and copy 3 files to the root directory: | ||
Line 6: | Line 6: | ||
#*startup.nsh | #*startup.nsh | ||
#*ShellFlash64.efi | #*ShellFlash64.efi | ||
− | # | + | #Insert the USB flash drive and ensure no other boot-able USB devices connected |
#Power on IPC2, enter BIOS by pressing F2. Go to "Boot Features" and set "Legacy Boot" to "Disable" | #Power on IPC2, enter BIOS by pressing F2. Go to "Boot Features" and set "Legacy Boot" to "Disable" | ||
#Check on the "Boot" tab that inserted USB listed as first boot device, otherwise change the boot order accordingly | #Check on the "Boot" tab that inserted USB listed as first boot device, otherwise change the boot order accordingly | ||
Line 15: | Line 15: | ||
#System may do several power cycles and then boot normally | #System may do several power cycles and then boot normally | ||
#Configure the settings of the new BIOS according to your needs | #Configure the settings of the new BIOS according to your needs | ||
+ | |||
+ | Note: In case of errors, it may be needed to remove all storage devices and perform the | ||
+ | programming process with USB flash drive only |
Revision as of 12:40, 1 September 2014
BIOS update procedure
- Prepare FAT formatted USB Disk-on-key
- Download the latest IPC2 BIOS ROM files
- Unzip and copy 3 files to the root directory:
- IPC2.cap
- startup.nsh
- ShellFlash64.efi
- Insert the USB flash drive and ensure no other boot-able USB devices connected
- Power on IPC2, enter BIOS by pressing F2. Go to "Boot Features" and set "Legacy Boot" to "Disable"
- Check on the "Boot" tab that inserted USB listed as first boot device, otherwise change the boot order accordingly
- Go to "Exit" and press "Exit Saving Changes"
- IPC2 will restart and BIOS update will take place
- Wait for "BIOS is updated successfully. Press any key to continue ..." message
- Remove USB disk and press ENTER
- System may do several power cycles and then boot normally
- Configure the settings of the new BIOS according to your needs
Note: In case of errors, it may be needed to remove all storage devices and perform the programming process with USB flash drive only