Difference between revisions of "IPC2 Broadwell BIOS update"

From fit-PC wiki
Jump to: navigation, search
Line 2: Line 2:
  
 
==BIOS update procedure==
 
==BIOS update procedure==
1. Download the latest [[IPC2 Broadwell BIOS ROM files]]<br>
+
1. Download the latest image with [[IPC2 Broadwell BIOS ROM files]]<br>
 
2. Extract the image file from archive.<br>
 
2. Extract the image file from archive.<br>
 
3. Prepare bootable USB image:<br>
 
3. Prepare bootable USB image:<br>
 
* Use Win32DiskImager utility for Windows: [https://sourceforge.net/projects/win32diskimager/ Win32DiskImager]<br>
 
* Use Win32DiskImager utility for Windows: [https://sourceforge.net/projects/win32diskimager/ Win32DiskImager]<br>
4. Boot IPC2 Broadwell from this USB Flash (Note: "CSM Support" and "Legacy Boot" should be enabled in Boot Features menu in BIOS Setup).<br>
+
4. Boot IPC2 Broadwell from the USB Flash.<br>
5. When booted into FreeDOS run UPDATE.BAT and wait for it's completion.<br>
+
5. When boots up into FreeDOS command line run ''update.bat'' and wait for it's completion.<br>
6. Disconnect power connector for 15 sec and connect it again. <br>
+
6. Wait until message "Disconnect power connector for 15 sec and connect it again".<br>
 +
7. Power cycle the IPC2.<br>
  
  Note: UEFI Boot option should be Enabled in BIOS setup: Main -> Boot Features
+
  Note: "UEFI Boot", "CSM Support" and "Legacy Boot" options should be Enabled in BIOS setup: Main -> Boot Features
  
 
[[category:IPC2]]
 
[[category:IPC2]]

Revision as of 15:02, 17 November 2016

The following procedure suitable IPC2 computers equipped with Intel Core gen 5 (Broadwell) processors.

BIOS update procedure

1. Download the latest image with IPC2 Broadwell BIOS ROM files
2. Extract the image file from archive.
3. Prepare bootable USB image:

4. Boot IPC2 Broadwell from the USB Flash.
5. When boots up into FreeDOS command line run update.bat and wait for it's completion.
6. Wait until message "Disconnect power connector for 15 sec and connect it again".
7. Power cycle the IPC2.

Note: "UEFI Boot", "CSM Support" and "Legacy Boot" options should be Enabled in BIOS setup: Main -> Boot Features