Difference between revisions of "IPC2 Broadwell BIOS update"
From fit-PC wiki
Line 2: | Line 2: | ||
Suitable for all OS: Windows 7/8, Linux in non-UEFI mode.br> | Suitable for all OS: Windows 7/8, Linux in non-UEFI mode.br> | ||
+ | <div class="toccolours mw-collapsible mw-collapsed" overflow:auto;"> | ||
== BIOS update procedure == | == BIOS update procedure == | ||
# Download the latest [[IPC2 Broadwell BIOS ROM files]] | # Download the latest [[IPC2 Broadwell BIOS ROM files]] | ||
Line 12: | Line 13: | ||
# Wait until message "Please disconnect this system from power for 15 sec for completion". | # Wait until message "Please disconnect this system from power for 15 sec for completion". | ||
# Power cycle the computer. | # Power cycle the computer. | ||
− | + | </div> | |
[[category:IPC2]] | [[category:IPC2]] | ||
[[Category:BIOS]] | [[Category:BIOS]] |
Revision as of 13:41, 2 May 2018
The following procedure suitable IPC2 computers equipped with Intel Core gen 5 (Broadwell) processors.
Suitable for all OS: Windows 7/8, Linux in non-UEFI mode.br>
BIOS update procedure
- Download the latest IPC2 Broadwell BIOS ROM files
- Extract the image file from the archive.
- Prepare bootable USB flash drive:
- Windows users - use Win32DiskImager utility: Win32DiskImager
- Linux users:
- Run this command to figure out what device name was assigned to the USB drive: $ ls -all /dev/disk/by-id/
- Assuming the USB drive was detected as /dev/sdx write the image on it by typing: $ sudo dd if=filename.img of=/dev/sdx bs=1MB
- Boot IPC2 from the USB Flash.
- When boots up into FreeDOS command line run: BIOS_UPD.bat and wait for it's completion without errors.
- After the system will boot again into FreeDOS command line run: ME_LOCK.bat and wait for it's completion without errors.
- Wait until message "Please disconnect this system from power for 15 sec for completion".
- Power cycle the computer.