Difference between revisions of "IPC2 Errata Notes"
From fit-PC wiki
(→IPC2ERR002: LAN1 (I218) Ethernet disappearance) (change visibility) |
|||
Line 6: | Line 6: | ||
* '''Fix''': Contact manufacturer | * '''Fix''': Contact manufacturer | ||
− | == IPC2ERR002: LAN1 (I218) Ethernet | + | == IPC2ERR002: LAN1 (I218) Ethernet OS detection issue == |
* '''Date''': 17-May-2017 | * '''Date''': 17-May-2017 | ||
* '''Symptom''': LAN1 (I218) is not detected by the OS if computer is rebooted with unplugged port | * '''Symptom''': LAN1 (I218) is not detected by the OS if computer is rebooted with unplugged port |
Revision as of 10:32, 17 May 2017
IPC2ERR001: LAN1 (I218) Ethernet FW speed
- Date: 8-Dec-2015
- Symptom: LAN1 (I218) operates at 10 Mbps instead of 1000 Mbps
- Applies to: Applies to products produced between 12 Nov, 2015 - 10 Dec, 2015. List of IPC2 computers with respective SN requires to apply the fix
- Cause: Data corruption during production programming phase
- Fix: Contact manufacturer
IPC2ERR002: LAN1 (I218) Ethernet OS detection issue
- Date: 17-May-2017
- Symptom: LAN1 (I218) is not detected by the OS if computer is rebooted with unplugged port
- Applies to: Applies to IPC2 Broadwell computers that shows such behavior.
- Cause: IPC2 Broadwell doesn't implement Ultra Low Power mode (Connected Standby).
- Fix: Install update I218 driver by installing PROWin (22.3) suite for your OS with connected LAN cable.
- Windows 10 driver: Intel® Network Adapter Driver for Windows® 10*
- After installation go to I218 driver properties - "Power Management" tab and uncheck "Ultra Low Power Mode when cable is disconnected" option in "Power Saver Options" list.
- The procedure required after each driver reinstall.