Difference between revisions of "IPC2 Troubleshooting"
From fit-PC wiki
(One intermediate revision by the same user not shown) | |||
Line 1: | Line 1: | ||
1. IPC2 BIOS reset: | 1. IPC2 BIOS reset: | ||
− | + | *Power down the PC and unplug the power cable. | |
− | + | *Open the service door (by screwing out one bolt) and remove it (with the storage). | |
− | + | *Reset the BIOS by pressing the low profile push button SW3 for 3 seconds. | |
− | + | *Install back the storage with the service door. | |
− | + | *Plug the power and power up the PC (either auto-on or pressing power button). | |
− | + | ||
:: [[File:IPC2_BIOS_reset.jpg]] | :: [[File:IPC2_BIOS_reset.jpg]] | ||
− | |||
2. Verify RAM memory modules are installed - | 2. Verify RAM memory modules are installed - | ||
− | + | *The system will not boot without memory. | |
− | + | ||
3. Try to answer the following questions: | 3. Try to answer the following questions: | ||
− | + | *Are you able to power up without storage? | |
− | + | *IPC2 supports up to 7200 rpm HDD drives. | |
− | + | ||
4. Power supply: | 4. Power supply: | ||
− | + | *Verify the power supply is not damaged and functions properly. | |
− | + | *If you have another power supply use it to eliminate and determine the failing side. | |
− | + | *In case you use other power supply make sure it provides uninterrupted power and stable grounding. | |
+ | 5. [[IPC2 BIOS Update]] | ||
− | + | 6. [http://www.fit-pc.com/web/support/rma/ RMA procedure] | |
[[category:IPC2]] | [[category:IPC2]] |
Latest revision as of 08:59, 19 July 2015
1. IPC2 BIOS reset:
- Power down the PC and unplug the power cable.
- Open the service door (by screwing out one bolt) and remove it (with the storage).
- Reset the BIOS by pressing the low profile push button SW3 for 3 seconds.
- Install back the storage with the service door.
- Plug the power and power up the PC (either auto-on or pressing power button).
2. Verify RAM memory modules are installed -
- The system will not boot without memory.
3. Try to answer the following questions:
- Are you able to power up without storage?
- IPC2 supports up to 7200 rpm HDD drives.
4. Power supply:
- Verify the power supply is not damaged and functions properly.
- If you have another power supply use it to eliminate and determine the failing side.
- In case you use other power supply make sure it provides uninterrupted power and stable grounding.