Difference between revisions of "Intense PC (MintBox 2) security update 170523"
From fit-PC wiki
(Created page with "# Download and save the attached archive: #* [http://fit-pc.com/download/intense-pc/bios/hotfix/ipc-security-update-170523/ipc_2.2.400.3.img.zip Update for Intense PC (MintBox...") (change visibility) |
|||
Line 9: | Line 9: | ||
# Wait until message "Please disconnect this system from power for 15 sec for completion" | # Wait until message "Please disconnect this system from power for 15 sec for completion" | ||
# Power cycle the computer. | # Power cycle the computer. | ||
+ | |||
+ | |||
+ | [[category:Intense PC]] | ||
+ | [[category:BIOS]] |
Revision as of 09:28, 30 May 2017
- Download and save the attached archive:
- Extract the image file from the archive.
- Prepare bootable USB image:
- Use Win32DiskImager utility for Windows: Win32DiskImager
- Use Win32DiskImager utility for Windows: Win32DiskImager
- Boot Intense PC or MintBox2 from the USB Flash drive.
- When boots up into FreeDOS command line run BIOS_UPD.bat and wait for it's completion without errors.
- After it the system will boot again into FreeDOS run ME_LOCK.bat and wait for it's completion without errors.
- Wait until message "Please disconnect this system from power for 15 sec for completion"
- Power cycle the computer.