Difference between revisions of "Intense PC (MintBox 2) security update 170523"

From fit-PC wiki
Jump to: navigation, search
Line 6: Line 6:
 
#**Use Win32DiskImager utility: [https://sourceforge.net/projects/win32diskimager/ Win32DiskImager]<br>
 
#**Use Win32DiskImager utility: [https://sourceforge.net/projects/win32diskimager/ Win32DiskImager]<br>
 
#* Linux users:
 
#* Linux users:
 +
#** Run this command to figure out what device name was assigned to your USB flash drive
 +
#** $ ls -all /dev/disk/by-id/
 
#** Assuming your USB flash drive was detected as /dev/sdx write the image onto it
 
#** Assuming your USB flash drive was detected as /dev/sdx write the image onto it
#** sudo dd if=ipc_2.2.400.3.img of=/dev/sdx bs=1MB
+
#** $ sudo dd if=ipc_2.2.400.3.img of=/dev/sdx bs=1MB
 
# Boot Intense PC or MintBox2 from the USB Flash drive.
 
# Boot Intense PC or MintBox2 from the USB Flash drive.
 
# When boots up into FreeDOS command line run ''BIOS_UPD.bat'' and wait for it's completion without errors.
 
# When boots up into FreeDOS command line run ''BIOS_UPD.bat'' and wait for it's completion without errors.

Revision as of 11:40, 20 June 2017

  1. Download the latest Intense PC BIOS image:
  2. Extract the image file from the archive.
  3. Prepare bootable USB flash drive:
    • Windows users:
    • Linux users:
      • Run this command to figure out what device name was assigned to your USB flash drive
      • $ ls -all /dev/disk/by-id/
      • Assuming your USB flash drive was detected as /dev/sdx write the image onto it
      • $ sudo dd if=ipc_2.2.400.3.img of=/dev/sdx bs=1MB
  4. Boot Intense PC or MintBox2 from the USB Flash drive.
  5. When boots up into FreeDOS command line run BIOS_UPD.bat and wait for it's completion without errors.
  6. After it the system will boot again into FreeDOS run ME_LOCK.bat and wait for it's completion without errors.
  7. Wait until message "Please disconnect this system from power for 15 sec for completion"
  8. Power cycle the computer.