Intense PC (MintBox 2) security update 170523

1. Make sure you run the latest BIOS image CR_2.2.0.400.2 X64, otherwise please Update it first.
2. Download and save the attached archive:
   • BIOS update for Intense PC (MintBox 2)
3. Extract the image file from the archive.
4. Prepare bootable USB image:
   • Use Win32DiskImager utility for Windows: Win32DiskImager
     
5. Boot Intense PC or MintBox2 from the USB Flash drive.
6. When boots up into FreeDOS command line run BIOS_UPD.bat and wait for it's completion without errors.
7. After it the system will boot again into FreeDOS run ME_LOCK.bat and wait for it's completion without errors.
8. Wait until message "Please disconnect this system from power for 15 sec for completion"
9. Power cycle the computer.