Difference between revisions of "Intense PC BIOS Update"
From fit-PC wiki
Line 4: | Line 4: | ||
# Download the latest [[Intense PC BIOS ROM files]] | # Download the latest [[Intense PC BIOS ROM files]] | ||
# Extract the image file from the archive. | # Extract the image file from the archive. | ||
− | + | <!-- prepare bootable USB drive --> | |
− | + | {{How to prepare bootable USB drive}} | |
# Boot Intense PC or MintBox2 from the USB Flash drive. | # Boot Intense PC or MintBox2 from the USB Flash drive. | ||
# When boots up into FreeDOS command line run ''BIOS_UPD.bat'' and wait for it's completion without errors. | # When boots up into FreeDOS command line run ''BIOS_UPD.bat'' and wait for it's completion without errors. | ||
Line 12: | Line 12: | ||
# Power cycle the computer. | # Power cycle the computer. | ||
<!-- | <!-- | ||
+ | |||
== Previous BIOS update procedure == | == Previous BIOS update procedure == | ||
1. Prepare bootable USB DOS image | 1. Prepare bootable USB DOS image |
Revision as of 14:02, 20 June 2017
Follow us on Google+ for software and BIOS updates
BIOS update procedure
- Download the latest Intense PC BIOS ROM files
- Extract the image file from the archive.
- Prepare bootable USB flash drive:
- Windows users - use Win32DiskImager utility: Win32DiskImager
- Linux users:
- Run this command to figure out what device name was assigned to the USB drive: $ ls -all /dev/disk/by-id/
- Assuming the USB drive was detected as /dev/sdx write the image on it by typing: $ sudo dd if=filename.img of=/dev/sdx bs=1MB
- Boot Intense PC or MintBox2 from the USB Flash drive.
- When boots up into FreeDOS command line run BIOS_UPD.bat and wait for it's completion without errors.
- After it the system will boot again into FreeDOS run ME_LOCK.bat and wait for it's completion without errors.
- Wait until message "Please disconnect this system from power for 15 sec for completion"
- Power cycle the computer.