Difference between revisions of "Intense PC BIOS Update"
From fit-PC wiki
(→BIOS update procedure) (change visibility) |
|||
Line 2: | Line 2: | ||
== BIOS update procedure == | == BIOS update procedure == | ||
+ | |||
+ | # Extract the the files from the archive to USB Flash formatted FAT32. | ||
+ | # Boot IPC into Internal Shell ("UEFI Boot" should be enabled in Boot Features menu of BIOS Setup) press F5 during boot. | ||
+ | # Please follow appeared update options in UEFI Shell (process BIOS update before ME update). | ||
+ | # Execute update.nsh script | ||
+ | # Execute me_up.nsh script | ||
Revision as of 11:19, 17 April 2018
Follow us on Google+ for software and BIOS updates
BIOS update procedure
- Extract the the files from the archive to USB Flash formatted FAT32.
- Boot IPC into Internal Shell ("UEFI Boot" should be enabled in Boot Features menu of BIOS Setup) press F5 during boot.
- Please follow appeared update options in UEFI Shell (process BIOS update before ME update).
- Execute update.nsh script
- Execute me_up.nsh script
Old BIOS versions procedure
- Download the latest Intense PC BIOS ROM files
- Extract the image file from the archive.
- Prepare bootable USB flash drive:
- Windows users - use Win32DiskImager utility: Win32DiskImager
- Linux users:
- Run this command to figure out what device name was assigned to the USB drive: $ ls -all /dev/disk/by-id/
- Assuming the USB drive was detected as /dev/sdx write the image on it by typing: $ sudo dd if=filename.img of=/dev/sdx bs=1MB
- Boot Intense PC or MintBox2 from the USB Flash drive.
- When boots up into FreeDOS command line run BIOS_UPD.bat and wait for it's completion without errors.
- After it the system will boot again into FreeDOS run ME_LOCK.bat and wait for it's completion without errors.
- Wait until message "Please disconnect this system from power for 15 sec for completion"
- Power cycle the computer.