Difference between revisions of "TEL-CANBUS"
From fit-PC wiki
(Created page with "==TEL-CANBUS== =<span style="color: red">'''WORK IN PROGRESS!!!'''</span>= * Type: '''COM''' * Config name: '''FQ''' * Interface: '''COM''' * TRIP" '''2,3,4,5,6,7,7B,8,9''' *...") (change visibility) |
|||
Line 14: | Line 14: | ||
===Specifications=== | ===Specifications=== | ||
− | + | * Using DB9 connector | |
− | * | + | * Supports CAN 2.0A Specifications and ISO 11898-2 |
− | * | + | * Bit rate of up to 1Mbit/s |
− | * | + | * DIP switch for enabling/disabling on-board 120 Ohm termination |
− | * | + | * Isolation per UL 1577, transient immunity: 30kV/uS, isolated DC 5V power |
− | + | * CANbus is driven by a dedicated 32bit microcontroller (ARM Cortex M0 - STM32F042C6) running open source firmware that can be upgraded | |
+ | * Driverless operation in Windows | ||
+ | * USB native device in Linux | ||
+ | * Over 10 ports can be installed | ||
===Instructions=== | ===Instructions=== | ||
<!-- | <!-- | ||
* [https://fit-iot.com/files/mechanical/TELS/TEL-CANBUS/Installation-instructions/fitlet2-TEL-CANBUS-installation-instructions.pdf fitlet2 TEL-CANBUS installation instructions] | * [https://fit-iot.com/files/mechanical/TELS/TEL-CANBUS/Installation-instructions/fitlet2-TEL-CANBUS-installation-instructions.pdf fitlet2 TEL-CANBUS installation instructions] | ||
− | + | ||
===Production files=== | ===Production files=== | ||
*Schematics | *Schematics | ||
− | + | ||
**[https://fit-iot.com/files/mechanical/TELS/TEL-CANBUS/Schematics/TEL-CANBUS-1_0-Schematic.zip TEL-CANBUS Rev1.0 Schematic files] | **[https://fit-iot.com/files/mechanical/TELS/TEL-CANBUS/Schematics/TEL-CANBUS-1_0-Schematic.zip TEL-CANBUS Rev1.0 Schematic files] | ||
− | + | ||
*Assembly | *Assembly | ||
− | + | ||
**[https://fit-iot.com/files//mechanical/TELS/TEL-CANBUS/Assembly/TEL-CANBUS-1_0-Assembly.zip TEL-CANBUS Rev1.0 Assembly files] | **[https://fit-iot.com/files//mechanical/TELS/TEL-CANBUS/Assembly/TEL-CANBUS-1_0-Assembly.zip TEL-CANBUS Rev1.0 Assembly files] | ||
− | + | ||
*Layout | *Layout | ||
− | + | ||
**[https://fit-iot.com/files/mechanical/TELS/TEL-CANBUS/Layout/TEL-CANBUS-1_0-Layout.zip TEL-CANBUS Rev1.0 Layout files] | **[https://fit-iot.com/files/mechanical/TELS/TEL-CANBUS/Layout/TEL-CANBUS-1_0-Layout.zip TEL-CANBUS Rev1.0 Layout files] | ||
− | + | ||
*Mechanical | *Mechanical | ||
− | + | ||
**[https://fit-iot.com/files/mechanical/TELS/TEL-CANBUS/Mechanical/TEL-CANBUS.DXF TEL-CANBUS Mechanical - DXF]<br> | **[https://fit-iot.com/files/mechanical/TELS/TEL-CANBUS/Mechanical/TEL-CANBUS.DXF TEL-CANBUS Mechanical - DXF]<br> | ||
**[https://fit-iot.com/files/mechanical/TELS/TEL-CANBUS/Mechanical/TEL-CANBUS.PDF TEL-CANBUS Mechanical - PDF] | **[https://fit-iot.com/files/mechanical/TELS/TEL-CANBUS/Mechanical/TEL-CANBUS.PDF TEL-CANBUS Mechanical - PDF] | ||
− | + | ||
*3D 360<sup>0</sup> model | *3D 360<sup>0</sup> model | ||
− | + | ||
**[https://sketchfab.com/3d-models/TEL-CANBUS-populated-e224f85861e3441eb42a39dd24f8fb3f TEL-CANBUS 3D 360<sup>0</sup> model on Sketchfab] | **[https://sketchfab.com/3d-models/TEL-CANBUS-populated-e224f85861e3441eb42a39dd24f8fb3f TEL-CANBUS 3D 360<sup>0</sup> model on Sketchfab] | ||
--> | --> | ||
Back to [[Tensor-PC TEL Modules]] | Back to [[Tensor-PC TEL Modules]] |
Revision as of 06:39, 25 August 2021
TEL-CANBUS
WORK IN PROGRESS!!!
- Type: COM
- Config name: FQ
- Interface: COM
- TRIP" 2,3,4,5,6,7,7B,8,9
- Stacking: A, C
- Features: CANbus
Specifications
- Using DB9 connector
- Supports CAN 2.0A Specifications and ISO 11898-2
- Bit rate of up to 1Mbit/s
- DIP switch for enabling/disabling on-board 120 Ohm termination
- Isolation per UL 1577, transient immunity: 30kV/uS, isolated DC 5V power
- CANbus is driven by a dedicated 32bit microcontroller (ARM Cortex M0 - STM32F042C6) running open source firmware that can be upgraded
- Driverless operation in Windows
- USB native device in Linux
- Over 10 ports can be installed
Instructions
Back to Tensor-PC TEL Modules