Difference between revisions of "TEL-CANBUS"
From fit-PC wiki
Line 23: | Line 23: | ||
* USB native device in Linux | * USB native device in Linux | ||
* Over 10 ports can be installed | * Over 10 ports can be installed | ||
− | |||
− | |||
<!-- | <!-- | ||
+ | ===Instructions=== | ||
+ | |||
* [https://fit-iot.com/files/mechanical/TELS/TEL-CANBUS/Installation-instructions/fitlet2-TEL-CANBUS-installation-instructions.pdf fitlet2 TEL-CANBUS installation instructions] | * [https://fit-iot.com/files/mechanical/TELS/TEL-CANBUS/Installation-instructions/fitlet2-TEL-CANBUS-installation-instructions.pdf fitlet2 TEL-CANBUS installation instructions] | ||
Revision as of 07:35, 25 August 2021
TEL-CANBUS
WORK IN PROGRESS!!!
- Type: COM
- Config name: FQ
- Interface: COM
- TRIP" 2,3,4,5,6,7,7B,8,9
- Stacking: A, C
- Features: CANbus
Specifications
- Using DB9 connector
- Supports CAN 2.0A Specifications and ISO 11898-2
- Bit rate of up to 1Mbit/s
- DIP switch for enabling/disabling on-board 120 Ohm termination
- Isolation per UL 1577, transient immunity: 30kV/uS, isolated DC 5V power
- CANbus is driven by a dedicated 32bit microcontroller (ARM Cortex M0 - STM32F042C6) running open source firmware that can be upgraded
- Driverless operation in Windows
- USB native device in Linux
- Over 10 ports can be installed
Back to Tensor-PC TEL Modules