Difference between revisions of "TEL-CANBUS"

From fit-PC wiki
Jump to: navigation, search
(WORK IN PROGRESS!!!)   (change visibility)
Line 5: Line 5:
 
* Config name: '''FQ'''
 
* Config name: '''FQ'''
 
* Interface: '''COM'''
 
* Interface: '''COM'''
* TRIP" '''2,3,4,5,6,7,7B,8,9'''
+
* TRIP: '''2,3,4,5,6,7,7B,8,9'''
 
* Stacking: '''A, C'''
 
* Stacking: '''A, C'''
 
* Features:  '''CANbus'''
 
* Features:  '''CANbus'''

Revision as of 07:36, 25 August 2021

TEL-CANBUS

WORK IN PROGRESS!!!

  • Type: COM
  • Config name: FQ
  • Interface: COM
  • TRIP: 2,3,4,5,6,7,7B,8,9
  • Stacking: A, C
  • Features: CANbus


TEL-CANBUS front.png


Specifications

  • Using DB9 connector
  • Supports CAN 2.0A Specifications and ISO 11898-2
  • Bit rate of up to 1Mbit/s
  • DIP switch for enabling/disabling on-board 120 Ohm termination
  • Isolation per UL 1577, transient immunity: 30kV/uS, isolated DC 5V power
  • CANbus is driven by a dedicated 32bit microcontroller (ARM Cortex M0 - STM32F042C6) running open source firmware that can be upgraded
  • Driverless operation in Windows
  • USB native device in Linux
  • Over 10 ports can be installed

Back to Tensor-PC TEL Modules