TEL-CANBUS
From fit-PC wiki
TEL-CANBUS
WORK IN PROGRESS!!!
- Type: COM
- Config name: FQ
- Interface: COM
- TRIP: 2,3,4,5,6,7,7B,8,9
- Stacking: A, C
- Features: CANbus
Specifications
- Using DB9 connector
- Supports CAN 2.0A Specifications and ISO 11898-2
- Bit rate of up to 1Mbit/s
- DIP switch for enabling/disabling on-board 120 Ohm termination
- Isolation per UL 1577, transient immunity: 30kV/uS, isolated DC 5V power
- CANbus is driven by a dedicated 32bit microcontroller (ARM Cortex M0 - STM32F042C6) running open source firmware that can be upgraded
- Driverless operation in Windows
- USB native device in Linux
- Over 10 ports can be installed
Back to Tensor-PC TEL Modules