Difference between revisions of "TEL-SATA1"
From fit-PC wiki
(→TEL-SATA1) (change visibility) |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
==TEL-SATA1== | ==TEL-SATA1== | ||
| − | + | ||
* Type: '''Storage''' | * Type: '''Storage''' | ||
* Config name: '''FT''' | * Config name: '''FT''' | ||
| + | * Compulab part number: '''FT.T-SATA1''' | ||
* Interface: '''SATA''' | * Interface: '''SATA''' | ||
| − | * TRIP | + | * TRIP: '''3,4''' |
* Stacking: '''A, C''' | * Stacking: '''A, C''' | ||
* Features: '''2x 2.5" SSD / HDD''' | * Features: '''2x 2.5" SSD / HDD''' | ||
| Line 17: | Line 18: | ||
===Instructions=== | ===Instructions=== | ||
| − | * [https://fit-iot.com/files/mechanical/TELS/TEL-SATA1/Installation-instructions/TensorPC-TEL-SATA1-installation-instructions.pdf TensorPC TEL-SATA1 installation instructions] | + | * [https://fit-iot.com/files/mechanical/TELS/TEL-SATA1/Installation-instructions/TensorPC-TEL-SATA1-installation-instructions.pdf TensorPC TEL-SATA1 installation instructions] --> |
===Production files=== | ===Production files=== | ||
| − | + | <b><u>Schematics</u></b> | |
| − | + | *[https://fit-iot.com/files/tensor-pc/TELs/FT.T-SATA1/FT.T-SATA1_V1_1_Schematics_8000133001.zip TEL-SATA1 Rev1.1 Schematic files] | |
| − | + | <b><u>Assembly</u></b> | |
| − | + | *[https://fit-iot.com/files/tensor-pc/TELs/FT.T-SATA1/FT.T-SATA1_V1_1_1_Assembly_drawings_8050133002.zip TEL-SATA1 Rev1.1 Assembly files] | |
| − | + | <b><u>Layout</u></b> | |
| − | + | *[https://fit-iot.com/files/tensor-pc/TELs/FT.T-SATA1/FT.T-SATA1_V1_1_1_Layout_8030133002.zip TEL-SATA1 Rev1.1 Layout files] | |
| − | + | <b><u>Mechanical</u></b> | |
| − | + | *[https://fit-iot.com/files/tensor-pc/TELs/FT.T-SATA1/FT.T-SATA1_V1_1_1_Mechanical_8010133002.zip TEL-SATA1 Mechanical - DXF]<br> | |
| − | + | ||
| + | <!-- | ||
*3D 360<sup>0</sup> model | *3D 360<sup>0</sup> model | ||
Latest revision as of 15:09, 25 August 2021
TEL-SATA1
- Type: Storage
- Config name: FT
- Compulab part number: FT.T-SATA1
- Interface: SATA
- TRIP: 3,4
- Stacking: A, C
- Features: 2x 2.5" SSD / HDD
Specifications
- Up to 2 2.5" SSD / HDD device can be installed
Production files
Schematics
Assembly
Layout
Mechanical
Back to Tensor-PC TEL Modules
