I am looking to reduce the electrical consumption of fitlet pc IA10
the fitlet runs on windows 7 x86
in the setup I have reduced the TDP but this does not change much
I also try to invalidate the sound as well as the serial port card
the best I get is a conommation of 7w
there may be another parameter that I can act
thank you
reduce the electrical consumption
Re: reduce the electrical consumption
You can disable any HW that is not a must, either via BIOS or via OS settings.
Re: reduce the electrical consumption
mbirger wrote:You can disable any HW that is not a must, either via BIOS or via OS settings.
thank you for your help, but i don't known wath is HW
Re: reduce the electrical consumption
ihave disable serial port and sound card
For processor in the setup i have reduce to 2 hearts and the power reduce to 4200
I made a measure at amperemeter and I find 800 mA
Do you have other ideas to reduce consumption
For processor in the setup i have reduce to 2 hearts and the power reduce to 4200
I made a measure at amperemeter and I find 800 mA
Do you have other ideas to reduce consumption
Re: reduce the electrical consumption
I made measurements of current consumption on the pc fitlet
If I put a bar of 4 G I fitlet consumes 140 mA less than with a bar of 8G
What is strange when I stop the pc I have a current of 180 to 200 mA
The fitlet pc in operation I arrive at a consumption of 380 mA with 4 G Ram and SSD 500 G
but 180mA when the fitlet was stop that makes a lot
If I put a bar of 4 G I fitlet consumes 140 mA less than with a bar of 8G
What is strange when I stop the pc I have a current of 180 to 200 mA
The fitlet pc in operation I arrive at a consumption of 380 mA with 4 G Ram and SSD 500 G
but 180mA when the fitlet was stop that makes a lot
Re: reduce the electrical consumption
This is correct.
It is also stated on fitlet spec - operation from 4.5W, which corresponds to 380mA at 12V.
It is also stated on fitlet spec - operation from 4.5W, which corresponds to 380mA at 12V.