Difference between revisions of "Fit-PC4: Revision Notes"
From fit-PC wiki
(→Rev 1.1 Changes) (change visibility) |
|||
| (2 intermediate revisions by the same user not shown) | |||
| Line 3: | Line 3: | ||
# Serial Number (SN) - Contact CompuLab | # Serial Number (SN) - Contact CompuLab | ||
# Silk Screen print on the main PCB | # Silk Screen print on the main PCB | ||
| + | |||
| + | |||
| + | Power supply temperature ratings differs from system ratings, mainly due to material used, | ||
| + | and limited to the following: | ||
| + | * Operating: 0°C – 40°C | ||
| + | * Storage: -10°C – 70°C | ||
| + | Customers have the ability to power the computers from another source. | ||
| + | |||
| + | |||
| + | |||
| + | The following changes relate to: | ||
| + | * fit-PC4 | ||
| + | * SBC-FITPC4 | ||
=== Rev 1.2 Changes === | === Rev 1.2 Changes === | ||
| Line 8: | Line 21: | ||
** Release date: 29/7/2014 | ** Release date: 29/7/2014 | ||
** First serial number (SN): TBD | ** First serial number (SN): TBD | ||
| − | * Power management optimization | + | * Power management improvements by 5-10W, resulting in power optimization: |
| − | * | + | ** Value models: 5W-11W |
| − | ** | + | ** Pro models: 6W-24W |
| − | + | * Improvement in BIOS battery discharge mechanism. | |
| − | * BIOS battery discharge | + | |
* Changed logo LED functionality: | * Changed logo LED functionality: | ||
| − | ** SW Off (S5)/Sleep (S3) states | + | ** SW Off (S5)/Sleep (S3) states: weak yellow |
| − | ** Active state (S0) | + | ** Power up: strong green + strong yellow during memory init (about 3 sec) |
| − | ** | + | ** Active state (S0): strong green |
| + | ** Memory init failed indicator: strong green + strong yellow (constant) | ||
| + | * Added connector for remote power button. | ||
| + | * Added ability to connect CMOS battery with harness. | ||
| + | * FACE Modules interface uses SMBUS0 instead SMBUS1. | ||
| + | * mSATA latching hole changed on Mac8 - M2 fix with M2 screw. | ||
=== Rev 1.1 Changes === | === Rev 1.1 Changes === | ||
| Line 22: | Line 39: | ||
** Release date: 19/02/2014 | ** Release date: 19/02/2014 | ||
** First serial number (SN): 140219-1101 | ** First serial number (SN): 140219-1101 | ||
| + | [[category:fit-PC4]] | ||
Latest revision as of 10:21, 6 April 2015
fit-PC4 HW Revisions
Identify the HW revision of your product:
- Serial Number (SN) - Contact CompuLab
- Silk Screen print on the main PCB
Power supply temperature ratings differs from system ratings, mainly due to material used, and limited to the following: * Operating: 0°C – 40°C * Storage: -10°C – 70°C Customers have the ability to power the computers from another source.
The following changes relate to:
- fit-PC4
- SBC-FITPC4
Rev 1.2 Changes
- 2nd revision
- Release date: 29/7/2014
- First serial number (SN): TBD
- Power management improvements by 5-10W, resulting in power optimization:
- Value models: 5W-11W
- Pro models: 6W-24W
- Improvement in BIOS battery discharge mechanism.
- Changed logo LED functionality:
- SW Off (S5)/Sleep (S3) states: weak yellow
- Power up: strong green + strong yellow during memory init (about 3 sec)
- Active state (S0): strong green
- Memory init failed indicator: strong green + strong yellow (constant)
- Added connector for remote power button.
- Added ability to connect CMOS battery with harness.
- FACE Modules interface uses SMBUS0 instead SMBUS1.
- mSATA latching hole changed on Mac8 - M2 fix with M2 screw.
Rev 1.1 Changes
- 1st revision
- Release date: 19/02/2014
- First serial number (SN): 140219-1101
