TEL-GPIO

From fit-PC wiki
Jump to: navigation, search

TEL-GPIO

  • Type: COM
  • Config name: FS
  • Compulab part number: FT.S_GPIO
  • Interface: USB2.0
  • TRIP: 2,3,4,5,6,7,7B,8,9
  • Stacking: A, C
  • Features: 20x GPIO - terminal block of 4x GPIO + 4 headers of 4 GPIO each


TEL-GPIO.png


Specifications

TEL-GPIO provides Isolated per UL 1577 GPIO input-output via USB CDC implementation

  • GPIOs are driven by a dedicated 32bit microcontroller (ARM Cortex M0 - STM32F072CB) running open source firmware that can be upgraded
  • 4 I/O GPIO on the device
  • Extendable up to 20 Isolated I/O GPIO.
  • Switch selectable GPIO power level(3.3v / 5.0v).
  • 2500 V rms for 1 minute per UL 1577
  • Unidirectional Isolation block.
  • Programmable GPIO input or output.
  • Reprogrammable MCU FW using build-in bootloader and openly available tools.
  • TEL-GPIO is Utilizing a USB2 Interface
  • Multiple TEL-GPIO cards can be installed in a system. Over 100 GPIO ports can be installed
  • Ambient Operation from –40°C to 85°C.

Production files

Schematics

Assembly

Layout

Mechanical


Back to Tensor-PC TEL Modules